Answer
May 09, 2023 - 01:53 PM
Look for the green LED on the connection plate near the adjuster socket to find the diagnostic LED. Check out the image below for reference.
Now, onto the faults, it can show:
2 flashes: Incorrect start procedure fault (both forward and reverse selected)
3 flashes: Bypass contactor welded (recycle through neutral to clear), or contactor coil short circuit (recycle the keyswitch to clear)
4 flashes: Direction contactor welded
5 flashes: Direction contactor did not close, or open-circuit motor
6 flashes: Faulty accelerator input
7 flashes: Low battery voltage
8 flashes: Thermal cutback
